Low MOQ Jewelry Manufacturer in Bangkok | Toanoi Jewelry

Toanoi Jewelry

Low MOQ Jewelry Manufacturer: MOQ and Pricing

Solid gold can start from a single piece, depending on the value of the item. Silver starts from 30 pcs, high-value pieces such as Cuban chains from 5 pcs, Cuban chains with diamonds from 1 piece, and light, low-value items such as nose studs from 50 pcs per SKU. Samples take 2 to 3 weeks after approval and production 4 to 6 weeks, in our Bangkok workshop on Sukhumvit 71. This page explains how that number is arrived at, so you can work out roughly where you stand before you email us.

Most factory websites either dodge this question or answer it with a number that turns out not to apply to whatever you actually want made. Both waste your time. Here is how it really works.

Why is there no single MOQ?

A minimum order quantity is not a rule a factory invents to be difficult. It is the point at which a job stops losing money.

Every new design carries one-off costs that do not change with quantity. The wax model. The mold. The first sample and the changes you make to it. Setting up the bench for that piece. Those costs are the same whether you order twenty or two thousand, so they land on each piece more heavily the fewer you make.

Against that sits the material. On a gold piece, the metal is most of what you are paying for, so the setup is a small share of the total and a short run still prices sensibly. On a silver piece, the material costs very little, so the setup dominates and a short run prices badly.

That is the whole of it. Which is why a real answer depends on what you are making.

What decides the minimum order quantity?

Metal

Solid gold can start from a single piece, depending on the value of the item. The material carries the cost, so a small run of gold pieces to test a market is a normal request. Higher-value pieces such as Cuban chains start at 5 pcs, and Cuban chains with diamonds at 1 piece.

925 sterling silver starts from 30 pcs per design. Light, low-value items such as nose studs start from 50 pcs per SKU.

Recycled gold is available, but the price per gram is above the standard bullion rate and it carries its own minimum. If your brand story depends on recycled metal, raise it in the first email rather than late in the quoting, because it changes both numbers.

Production method

Casting needs a mold. Once it exists, repeat orders are faster and can be smaller.

Stamping has a higher setup than casting and a lower unit cost, so it wants real volume to make sense. Above a certain quantity it is clearly the right choice.

Handmade has almost no setup and a high cost per piece, which flips the usual logic. Small runs of handmade work are perfectly reasonable. Large runs are expensive.

Laser cutting is flexible on quantity and often the cheapest way to do fine repeated detail.

Stones

Stones affect the minimum in a way people rarely expect. Buying one good sapphire is easy. Buying two hundred that match each other for color and tone is a different job, and it is the matching, not the buying, that sets the floor.

Common stones in common sizes are flexible. Unusual cuts, unusual sizes and specific color matching push the minimum up, because we have to buy a parcel and select from it. Diamonds, natural or lab grown, are generally easier to specify tightly and therefore easier to run in smaller numbers.

We source our own stones through the Bangkok trade and we are a member of the Thai Gem & Jewelry Traders Association (TGJTA), which is why we can tell you at quoting stage whether your stone specification is going to be a problem, rather than discovering it during production.

Repeat orders

Second and later orders of the same design are almost always easier. The mold exists, the sample is approved, the bench knows the piece. If your first run was uncomfortable on quantity, the next one usually is not.

How do you quote a jewelry order?

You get a price per piece at the quantities you asked about. Metal weight, labour, stones, finish and plating are separate lines, because if the number is too high, one of those five is the reason and you may be able to change it.

A few practical points about quotes:

  • Metal prices move daily. A quote holds for a stated period and the period is written on it. This is not a sales tactic. Gold moved and so did the price.
  • Ask for two or three quantities at once. Seeing 50, 200 and 500 side by side tells you more than any explanation of MOQ can.
  • Sampling is quoted separately. A sample costs what it costs to make one piece properly, and it is money well spent.
  • Plating is per piece. Rhodium costs more than gold plating. On a large silver run it is a real line item, not a rounding error.

What does a first project usually look like?

The brands that get a good result tend to do the same things.

They start with fewer designs than they want to. Four pieces made properly beat twelve made thinly.

They take the sample stage seriously. Changes to a sample are cheap. Changes once a run has started are expensive and slow, and sometimes they are not possible at all.

They tell us the real deadline early. If you need stock for a fair or a season, say so at the first email. Samples take 2 to 3 weeks after approval, production takes 4 to 6 weeks, and re-orders and catalog items take 4 weeks. Most of the rest is decision time, and that is the part you control.

And they ask about quantity before falling in love with a design, not after.

What are the payment terms?

Payment is 50% before production and 50% before shipping. CAD is paid in full before work starts. Established clients often move to different terms once there is a history. We are a manufacturer, not a finance company, so we would rather agree something straightforward at the start than renegotiate it under time pressure later.

We ship worldwide, including the US, by FedEx or DHL, from around US$40.

Ask us for a real number

Send the design, or a photograph of something close to it, the metal you have in mind, the stones if you know them, and the quantity you were hoping for. You will get back a price and an honest answer about whether that quantity works, including the case where the honest answer is that you should wait until you can order more.

Email [email protected] or call +66 91 760 0505. The office is on Sukhumvit 71 in Bangkok, open Monday to Friday 9:30am to 5pm and Saturday 10am to 3pm.

Questions about MOQ, lead times and payment

The figures from this page, in short.

What is the minimum order for solid gold jewelry?

Solid gold can start from a single piece, depending on the value of the item. Higher-value pieces such as Cuban chains start at 5 pcs, and Cuban chains with diamonds at 1 piece.

What is the minimum order for 925 sterling silver?

Silver starts from 30 pcs per design. Light, low-value items such as nose studs start from 50 pcs per SKU.

How long do samples and production take?

Samples take 2 to 3 weeks after approval, production takes 4 to 6 weeks, and re-orders and catalog items take 4 weeks.

Is the sample charged separately?

Yes. Sampling is quoted separately, and a sample costs what it costs to make one piece properly. Design and 3D rendering start at $30 per design and rise with the complexity of the piece.

What are your payment terms?

Payment is 50% before production and 50% before shipping. CAD is paid in full before work starts.

Do you ship worldwide?

Yes, including the US, by FedEx or DHL, from around US$40.

What should I send to get a price?

The design, or a photograph of something close to it, the metal you have in mind, the stones if you know them, and the quantity you were hoping for. The price per piece is built from metal weight, labour, stones, finish and plating, shown as separate lines.

Scroll to Top